Wilfa Narvik 25, Instruction Manual

Page: 25 / 154

25
EN
AIR CONDITIONER · NARVIK
• Signal may be interfered easily in the room where there is fluorescent lamp or
wireless telephone; remote controller should be close to indoor unit during
operation.
• Replace new batteries of the same model when replacement is required.
• When you don’t use remote controller for a long time, please take out the
batteries.
• If the display on remote controller is fuzzy or there’s no display, please replace
batteries.
EMERGENCY OPERATION
If remote controller is lost or damaged, please use auxiliary button to turn on or
turn off the air conditioner. The operation in details are as below: As shown in the
figure Open panel, press aux. button to turn on or off the air conditioner. When
the air conditioner is turned on, it will operate under auto mode.
Warning:
Use insulated object to press the auto button.
CLEANING AND MAINTENANCE
Warning:
• Turn off the air conditioner and disconnect the power before cleaning the air
conditioner to avoid electric shock.
• Do not wash the air conditioner with water to avoid electric shock.
• Do not use volatile liquid to clean the air conditioner.
CLEAN SURFACE OF INDOOR UNIT
When the surface of indoor unit is dirty, it is recommended to use a soft dry cloth
or wet cloth to wipe it.
Note:
Do not remove the panel when cleaning it.
Panel
Aux. button