Wilfa Narvik 25, Instruction Manual

Page: 18 / 154

18
EN
INSTRUCTION MANUAL · AIR CONDITIONER
DISPLAY SCREEN
----------
I feel
Turbo mode
Send signal
no function
no function
8°C heating function
WIFI function
X-FAN function
Set time
TIMER ON /TIMER OFF
Set temperature
Child lock
Up & down swing
Left & right swing
Quiet
Set fan speed
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Clock
Sleep mode
Light
Set temp.
Outdoor ambient temp. (not available in nordic coutries)
Indoor ambient temp.
Operation mode
Temp. display type
HOW TO USE
INTRODUCTION FOR BUTTONS ON REMOTE CONTROLLER
Note:
• This is a general use remote controller, it could be used for the air
conditioners with multifunction; For some function, which the model don’t
have, if press the corresponding button on the remote controller that the unit
will keep the original running status.
• After putting through the power, the air conditioner will give out a sound.
• Operation indictor “ ” is ON (red indicator). After that, you can operate the
air conditioner by using remote controller.
• Under on status, pressing the button on the remote controller, the signal
icon “ “ on the display of remote controller will blink once and the air
conditioner will give out a “de” sound, which means the signal has been sent
to the air conditioner.
• Under off status, set temperature and clock icon will be displayed on the
display of remote controller (If timer on, timer off and light functions are set,
the corresponding icons will be displayed on the display of remote controller
at the same time); Under on status, the display will show the corresponding
set function icons.