11
English
English
OPERATION METHOD
Notes:
• Water bucket must be correctly installed for the dehumidifier to operate.
• Do not remove the bucket while unit is in operation.
• If you want to use drain hose to drain water away, please install the hose according to
section ”Drainage method”.
• Each time pressing the effective button on the control panel will give out a ”beep” sound.
• When tuning on the unit, the running indicator is ON. Running indicator is OFF under
standby status.
Basic Functions of the Buttons
➊
Running Button
Press this button to turn on/off dehumidifier.
➋
+/- Button
Under free drying mode press these buttons to adjust set humidity. Invalid under
other modes.
• Pr button will increase humidity while pressing - button will decrease
humidity. The display range of humidity is 35%~80%. Each pressing will increase/
decrease humidity by 5%.
• Continuous Dehumidify Setting: To set the unit for continuous operation, press
the - button until the screen reads CO.
Running on
indicator light
Continuous operation
on indicator light
Clean the Filter
indicator light
Bucket full light indicates
bucket needs to be
emptied or it is not in
the proper place
FILTER Button
Running Button
+/- Button
Display
Summary of Contents for Dry M
Page 2: ......
Page 84: ......
Page 85: ...AS WILFA Industriveien 25 1481 Hagan Norway wilfa com WDH 10_20_02 ...
