EN
Note! Always remember to erase the
average calculation memory after the
measurement series so that the
previous average value will not affect
the average value of the new lot.
Average calculation memory can
accomodate maximum 99 results. If no
more results can be added to the memory,
the number on the display will start
blinking.
3.4.3. Adjusting the result
If the quality of the measured material is
different from normal, the result can be
incorrect. You can adjust the result shown
by the meter to conform with a reference
value.
- Adjusting the value upwards
When the measurement result is
displayed make the double press on the
MENU-
button.
Three bars will appear
on the upper edge of the display. Wait
for a moment and the result appears on
the display again.
Now each time you
push the
MENU
- button, 0,1 moisture %
will be added to the result.
- Adjusting the value downwards
When the measurement result is
displayed, push the
MENU-
button for
three times.
Three bars will appear on
the lower edge of the display. Wait for a
moment and the result appears on the
display again.
Now each time you push
the
MENU-
button, 0,1 moisture % will be
deducted from the result.
Note! This adjustment is specific to the
used scale. In other words there may
Summary of Contents for Bio Moisture Wood
Page 2: ......
