EN
cup and shake the meter. Then fill the
measuring cup (for sawdust fill the cup to
the brim) and twist the cap until the center
of the cap is on the same level with the
cap's surface. Now the compression of the
sample is good enough (see pictures in
the appendix).
Measurement
Before carrying out the measurement
mix the collected sample properly .
Switch on the meter with a single press on
the
ON/OFF
-button.
The number of the selected scale will
appear on the display. After that the meter
proceeds to the measurement. You will
see
run
on the display during the
measurement. The result of the
measurement (moisture content) will be
displayed in weight percent. After the
measurement the meter will automatically
go off and will be ready for a new
measurement.
You can ensure that the measurement
result represents the average quality of
the whole mass by making the
measurement from different places of the
mass. Make several measurements if
needed. Note, that the moisture content in
the same mass can vary greatly.
3.4. Processing the result
3.4.1. Automatic average calculation
The meter can calculate the average
value of several measurements. After you
have made the measurement, the result
can be saved for the average calculation.
Summary of Contents for Bio Moisture Wood
Page 2: ......
