Wildix WSG08POE User Manual Download Page 4 | Manualshive

Page: 4 / 34

Wildix WSG08POE User Manual Download Page 4

Introduction

Product Overview

This switch is equipped with 8-ports PoE + 10/100/1000BaseT(X) with 2 combo gigabit SFP open
slots. It is designed for easy installation and high performance in an environment where traffic is on
the network and the number of users increases continuously. The compact rigid 19” rack-mount size
is specifically designed for small to medium workgroups. It can be installed where the space is
limited; moreover, it provides smooth network migration, the network capacity can be upgraded
easily.
In addition, the switch has comprehensive features such as QoS (Quality of Service), Spanning
Tree, VLAN, Power over Ethernet (PoE), Link Aggregation, SNMP, IGMP Snooping capability via
the intelligent software. It is suitable for both metro-LAN and office application.

Web Management Features

Configuration
Administrator
Ports Configuration
VLAN Setting
Trunking
Link Aggregation
Raid Spanning Tree
IGMP Snooping
Port Mirroring
QoS Setting
PoE Configuration
Storm Control
Monitoring
Statistics Overview
Detailed Statistics
LACP Status
RSTP Status
IGMP Status
VeriPHY
Ping
Maintenance
Reboot Device (Warm Restart)
Load Default Setting (Factory Default)
Firmware Updating (Software Upload)
Backup/Recovery (Configuration File Transfer)

Wildix WSG08POE User Manual

4

«
...
2
3
4
5
6
...
»

Summary of Contents for WSG08POE



































Reviews:

No comments