W-PA SIP Public Announcer - Admin Manual
W-PA SIP Public Announcer - Admin Manual
Page 6 of 7
1.
2.
The intercom function itself is implemented by placing calls from/ to the connected switch components.
Connection of switch components
1-4 - Connect an intercom panel to Speaker, LED, Function key and Microphone interfaces
5 - Connect a door release switch to Switch input interface
6 - Connect an electric lock to Switch output interface
Switch components configuration
Configure Function keys to be able to place calls from/ to connected switch components:
Go to WMS -> Users
Note: W-PA and Viking W-100 Handsfree Doorbox
To use W-PA with Viking W-1000, disconnect the circuit board and use 8 Ohm speaker, microphone and
switch.
Note: you can set up only 2 Function keys: "
Colleague
" or "
Speed Dial
".
