SuperVision User Guide
SuperVision User Guide
Page 19 of 24
For connection of WHS-BT headset, read the guide:
WHS, WP490EXT, WPEHS - Quick Start Guide
Third-party headsets integrated with Wildix:
Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL
Wizyconf-Voice speakerphone
To connect the Wizyconf-Voice speakerphone to SuperVision:
Press and hold (2secs) the
button until the light flashes blue
Bluetooth
Enable Bluetooth on the device, and select Wizyconf-Voice from the list of available Bluetooth device.
The light turns solid blue when the connection is established
Appendix 3. Integration with intercoms
Info on intercoms which are fully integrated with Wildix system:
.
User Guides on Integration with some Intercoms are available on
=Configuration of intercoms for sending video stream before answer and adding an unlock button:
.
integration with Wildix - Video before answer and Unlock button
Appendix 4. Phone recovery
How to perform a factory reset:
If your phone is on, turn it off
Press and hold the
button and turn on power (using power adapter or PoE)
Speaker
Release
button after 5 seconds (release the button right after Wildix logo appears on the display)
Speaker
Boot menu appears: select
using
buttons and press
button to
Factory reset
Volume Up/ Down
Speaker
confirm
More information in Wizyconf-Voice Speakerphone User Guide and Wizyconf Datasheet, available on
Wizyconf Videoconference Documentation
NOTE: THIS OPERATION MUST BE MADE BY THE SYSTEM ADMINISTRATOR