4
Connect the red (positive) battery wires to the red
(positive) terminals on the batteries and the black
(negative) battery wires to the black (positive) battery
terminals.
5
Close battery compartment and wrap the extension
wire back on to the extension wire spool.
Connecting to camera
Note: The EBX is only intended for use with Wildgame
Innovations 2010 game scouting cameras, or newer.
1
Locate the external battery port on your Wildgame
Innovations camera and pull out the battery port plug.
2
Next, unwrap the extension wire to the required length
and install the EBX plug into the external battery port
ensuring that it is fully inserted.
Charging the EBX
1
Find the battery charge port located towards the top of
the battery compartment and pull out the rubber plug.
2
Next, locate the charger and insert the adapter into
the EBX.
3
Plug the charger in and charge the batteries for at
least, but no more than 8 hours.
4
After the EBX is charged unplug it and replace the
rubber plug.
