Power On
page 5
1.
To turn the unit ON, press and
release the power button.
2.
Check the battery level icon to
ensure the batteries just installed
contain the proper charge level.
If so, you are ok to proceed with
camera use.
Note:
When Powered on or Woken up, the camera takes 5-10
seconds to check SIM card and/or Network settings. The
buttons are locked during this period.
UP
OK
L
R
DN
Test Mode
1.
LCD Ready Mode: The camera will
automatically enter Ready Mode if
a button is not pressed for greater
than 30 seconds. The status lights
will illuminate for a total of 2
minutes.
2.
PIR LED Status Light: During the
first 2 minutes of Ready Mode, the
red light will illuminate when a PIR
event is triggered. The red light will
blink for 2-3 seconds when photo
is taken during this first 2 minutes.
After 2 minutes all indicator
lights will turn off until a button is
pressed.
UP
OK
L
R
DN
