8
Removal of the front glass panel.
The top glass clamp is held in place with 3 screws. This panel
is concealed behind the top cover strip which is held in place
by two magnets. The two magnets are fiNed to the top glass
clamp as shown in this diagram.
Carefully remove the 3 fixing screws and whilst supporng
the glass panel, remove the clamp. Now li the glass from
the appliance. The boNom edge of the glass is retained in the
two supports boNom le and right.
Now the ceramics can be installed, rearranged correctly or
removed for service. Correct installaon of ceramics is
detailed on pages 16—22.
Installa8on of the front glass panel.
Before replacing the glass ensure that the seal around the top
and two sides of the firebox is in good condion and is
securely affixed to the appliance. If the seal is damaged or
loose then it should be replaced / reaffixed before the glass is
replaced. This seal is important and if damaged, the appliance
should not be operated.
The glass panel should be undamaged. If the glass panel is
broken or cracked it should not be used. Contact the
manufacturer for a suitable replacement before connuing.
Replace the glass panel into posion by locang the boNom
edge into the lower support.
Rotate the glass panel back into posion and hold whilst the
top clamp is secured with the 3 fixing screws (as detailed
above.
Ensuring the two magnets are in the correct posion (see
above) then the top cover can be placed into posion. This
component is purely decorave and is used to conceal the
top clamp fixing structure.
Summary of Contents for RAVEL HE F-101 2 Series
Page 17: ...17...
