14
Replacement of the Injector
1.
Remove the screws from the base of the two inclined burners. Two each side, total 8 screws.
2.
Unscrew the injector elbow from the burner assembly.
3.
Remove the screws from the middle burner, total 4 screws.
4.
Remove the screws from the Burner Inlet Shield Panel, total 8 screws.
5.
The injector can be removed and replaced.
6.
Re-assemble in reverse order.
7.
Re-assemble the burner tray into the firebox (see previous page)
Only replacement components supplied by the manufacturer should be used in the service of this appliance.
Contact details for Hearth Products Ltd can be found on the back page of these instrucons.
Summary of Contents for RAVEL HE F-101 2 Series
Page 17: ...17...
