Lights, Signals, Switches and Handlebars
• Check all lights, meters, indicator lights and electrical connections to make sure
they are all in proper working condition.
• Check the handlebars make sure they turn both ways smoothly.
Tires
• Always check the tires before riding, be sure they are in good condition, check
for nails, glass or any other items that may puncture your tire. Check for cracks
in the side wall. If there are any problems replace immediately.
Tire Pressure
• To ensure maximum performance and safe operation please check the tire
pressure before riding. Do not over or under inflate your scooters tires because
the handling characteristics are very different with improper air.
• Front Tire Pressure: 28 psi (cold)
• Rear Tire Pressure: 34 psi (cold)
Brakes
• Check the brakes before you ride each time if they are soft or spongy or are not
working right, repair immediately.
• Apply the brakes and make sure that the fluid is not leaking out of the brake
lines the master or wheel cylinder.
Brake Fluid Level
• Check your front brake fluid level, add if necessary.
1. When checking the fluid level make sure the top of the brake master cylinder
is level by centering the handlebars.
2. Refill with DOT 3 brake fluid. Mixing fluid may result in a harmful chemical reaction
and lead to poor brake performance.
3. Be careful that water does not enter the master cylinder when refilling.
NOTE:
Brake fluid may destroy painted surfaces or plastic parts, be sure to
clean up all spills.
8
Please have the last 7 digits of your VIN# ready when you call for parts.
Have a problem - Need parts - Please call Toll Free (866) 658-7300 • Email: [email protected]
7
cape for brake
master cylinder
brake master cylinder
Pre Ride Check
Fuel
• Check before you ride. Do not over fill the tank. Fuel capacity: 1.75 gal.
Throttle
• Turn the throttle and make sure that it turns smoothly, freely
and returns to idle when released.
Checking the Engine Oil
• Place the scooter on level ground on the center stand.
• If the oil level is below the designated area, add 5W50,
10W50 or 15W50 synthetic oil until the level is between the
lower and upper marks on the dipstick. Do not overfill.
Note:
Be sure the scooter is level when checking the oil. A slight tilt to the left or
right can cause a false reading.
Steering Inspection
• Place the scooter on a stand so that the front wheel is off the ground. Hold the
lower end of the front fork and try to move it forward and backward. If any free
play can be felt consult a mechanic regarding the steering.
NOTE:
Securely support the scooter so there is no danger of it falling over.
Final Drive Oil
• Recommended Oil: 5W50, 10W50 or 15W50 synthetic engine oil.
Dipstick
Fill Plug
Drain Plug
Check before Riding
• Make sure the brakes and throttle work properly and adjust if necessary.
• Check bolts for tightness.
• Make sure there is plenty of fuel.
• Check tire pressure.
• Check all of the lights, headlight, taillight, turn signal etc.
• Check the engine oil.
