WIL-10272-E-01
Wilden
®
9
PERFORMANCE
T8 METAL
RUBBER-FITTED
Height ............................ 668 mm (26.3")
Width ............................. 404 mm (15.9")
Depth ............................. 343 mm (13.5")
Est. Ship Weight ... Aluminum 33 kg (72 lbs)
Cast Iron 52 kg (114 lbs)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 51 mm (2")
Outlet ...................................... 51 mm (2")
Suction Lift ...................... 6.4 m Dry (21')
9.5 m Wet (31')
Disp. Per Stroke
1
................. 2.69 l (0.71 gal.)
Max. Flow Rate .......... 617 lpm (163 gpm)
Max. Size Solids ................... 6.4 mm (1/4")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2 bar (30 psig) head pressure.
Example:
To pump 318 lpm (84 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 85 Nm
3
/h (50 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
T8
METAL
TPE-FITTED
Height ............................ 668 mm (26.3")
Width ............................. 404 mm (15.9")
Depth ............................. 343 mm (13.5")
Est. Ship Weight .. Aluminum 33.1 kg (72 lbs)
Cast Iron 52.4 kg (114 lbs)
316 Stainless Steel 48.8 kg (106 lbs.)
Alloy C 53.4 kg (116 lbs.)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 51 mm (2")
Outlet ...................................... 51 mm (2")
Suction Lift ...................... 6.1 m Dry (20')
9.5 m Wet (31')
Disp. Per Stroke
1
............... 2.80 L (0.74 gal.)
Max. Flow Rate .......... 613 lpm (162 gpm)
Max. Size Solids ................... 6.4 mm (1/4")
1
Displacement per stroke was calculated at
4.8 bar (70 psig) air inlet pressure against a
2 bar (30 psig) head pressure.
Example:
To pump 341 lpm (90 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 85 Nm
3
/h (50 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Section 5
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
