WIL-10272-E-01
Wilden
®
10
PERFORMANCE
T8 METAL
PTFE
-FITTED
Height ............................ 668 mm (26.3")
Width ............................. 404 mm (15.9")
Depth ............................. 343 mm (13.5")
Est. Ship Weight .. Aluminum 33.1 kg (72 lbs)
Cast Iron 52.4 kg (114 lbs)
316 Stainless Steel 48.8 kg (106 lbs.)
Alloy C 53.4 kg (116 lbs.)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 51 mm (2")
Outlet ...................................... 51 mm (2")
Suction Lift ...................... 3.7 m Dry (12')
9.5 m Wet (31')
Disp. Per Stroke
1
............... 1.51 L (0.40 gal.)
Max. Flow Rate .......... 534 lpm (141 gpm)
Max. Size Solids ................... 6.4 mm (1/4")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2 bar (30 psig) head pressure.
Example: T
o pump 284 lpm (75 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 102 Nm
3
/h (60 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
T8
METAL STALLION
ULTRA-FLEX
TM
-FITTED
Height ............................ 668 mm (26.3")
Width ............................. 610 mm (24.0")
Depth ............................. 345 mm (13.6")
Est. Ship Weight ..... Aluminum 33 kg (72 lbs)
Cast Iron 52 kg (114 lbs)
316 Stainless Steel 48 kg (106 lbs.)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 51 mm (2")
Outlet ...................................... 51 mm (2")
Suction Lift ...................... 3.4 m Dry (11')
9.5 m Wet (31')
Disp. Per Stroke
1
................. 1.66 l (0.44 gal.)
Max. Flow Rate .......... 568 lpm (150 gpm)
Max. Size Solids ................. 19.0 mm (1/4")
1
Displacement per stroke was calculated at
4.8 bar (70 psig) air inlet pressure against a
2 bar (30 psig) head pressure.
Example:
To pump 322 lpm (85 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 110.5 Nm
3
/h (65 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
