18
Tighten the nub screw with a 1.5mm allen key to
secure the collar.
13
As per the TURBO WHEEL instructions - Partially
inflate, just so the tyre lightly grabs the rim.
Take note of the bead line around the tyre
close to the rim edge. For balance you want
the space between this and the rim to be
even the whole way around on both sides.
To adjust, squeeze the tyre and position on
the rim. When you’re happy add a little air to
secure it then repeat on the other side.
14
Once the spacing is relatively even, fully inflate to
the required pressure (35-45psi for Cross wheel).
To check balance, hold up the wheel and spin.
You may see a light visible wobble but as long as
you cannot feel it in your arms it will run smooth.
If it feels off balance check the bead line against
the rim both sides as it spins to gauge where you
need to adjust. Deflate and repeat.
16
15
1.5
CHANGING TYRES -