WILDCAT MINIBMX USER GUIDE
9
30
IMPORTANT: Cut the cable approximately 2cm
from the clamp and replace the ferrule / cap
on the end of the cable to prevent it fraying and
causing injury.
This will ensure the cable does not
get caught in the disc while riding.
29
Push the arm forwards until the outside brake
pad almost touches or lightly touches the brake
pad. Tighten the cable clamp using a 5mm
allen key. Then squeeze the brakes firmly a few
times, this will settle the cable and back the
adjustment off slightly. Before testing, spin the
wheel and check if there is any disc contact. If
so, undo the cable clamp and back the arm off
slightly then re-tighten.
31
Secure the cable to the top tube at both ends,
using the 2 x velcro ties.
5
