Specifications
Wingspan
84 inches
Length
76 inches
Wing Area
1350 sq. inches
Weight
16-18 lbs .
Recommended engine
50 to 62 cc gasoline engine
Additional equipment required
Computer Radio with at least 8 channels
2 Elevator servos minimum 100 oz/in. of torque each
2 aileron servos, total torque required not less than 120 oz./in. per wing.
Rudder servo(s) at least 180 oz./in. (see text)
Throttle servo
Radio operated engine kill switch or servo operated choke strongly suggested
Single or dual radio battery packs at least 1650 mah total
Switch[es] for receiver batteries
Miscellaneous servo extensions.
High strength pushrods, carbon fiber reinforced suggested.
Gasoline resistant fuel tank and lines with filler system.
3.5 inch wheels for main landing gear, 1.5 inch tail wheel.
3/16 inch axles for main landing gear
3.5” spinner
Rocket city #69D or similar control horn set (3 sets required)
Please remember, this is a big airplane with high stresses on the controls. You
must use high performance servos, pushrods, linkages, horns, etc.
Flexing in
linkage or loose hinges can and will cause flutter of the control surfaces
which will destroy the airplane in just a few seconds. Metal gear servos are
required. Proper installation of hinges is critical.
