Wilbur Curtis 1970 Series, User Manual

Page: 13 / 92

13
User Manual Curtis Genesis
Safety
Installation location
• The device can be used as a self-service device if it is supervised
by trained personnel.
The machine must be set up so as to allow good visual access.
• The device must be placed and levelled on a horizontal, sturdy,
water-resistant, and heatproof base.
• The device must not be cleaned using a water jet. The device
must be installed where it is protected against water spray.
• The device must not be located on a surface that is sprayed or
cleaned with a water hose, steam jet, steam cleaner, or similar
devices.
Water supply
• 3/8 inch hose connector with water mains tap, and dirt filter
with 0.003 in (0.08 mm) mesh size, on-site. At least 29 psi
(0.2 MPa) (2 bar) supply pressure at 0.53 gal/min (2 l/min).
Maximum 87 psi (0.6 MPa) (6 bar).
Maximum inlet temperature 95 °F (35 °C).
• The set of hoses provided with the new coffee machine
and/or the new water filter must be used. Do not use the old
set of hoses.
Ambient temperature
• Ambient temperature 41 °F to a maximum of 95 °F
(+5 °C to a m35 °C)