22
WIKA operating instructions Ultra High Purity transducer, model WUD-2x
11611057.05 08/2021 EN/DE
EN
Parameters Description
Setting range
Factory setting
DISU
Display update
0.2 / 0.5 / 1 / 5 / 10 / 60 s 0.2 s
DISO
Display of zero offset
(The setting has no influence on the output
signal. Only the display-indicated value is set.)
±10 % of span
0 %
MBA = Start of measuring range
MBE = End of measuring range
5.3.5 Error display
Error
Description
ATT
Setting lies outside the range
(To acknowledge the error display, press the main key)
OL
Pressure too high, measuring range exceeded > approx. 5 % (display blinks)
UL
Pressure too low, below the measuring range < approx. 2 % (display blinks)
5. Commissioning, operation
