EN
WIKA additional information Model PG43SA-S (ATEX)
14279987.02 05/2019 EN/DE/FR/ES
5
1.2 Intended use
These pressure gauges are suitable for pressure measurement for
industrial applications in hazardous areas.
Applications
■
Hygienic pressure measurement in sanitary applications for the
pharmaceutical, biotechnology, food and beverage industries
■
Mechanical pressure display on pipelines, fermenters, bioreactors
and vessels
■
Pressure/vacuum monitoring during cleaning, sterilisation, pressure
testing
■
For gases, compressed air, vapour; liquid, pasty, powdery and crystal-
lising media
The instruments have been designed and built solely for the intended
use described here, and may only be used accordingly.
Check whether the classification is suitable for the application (see Ex
marking, chapter 1.5 “Safety marks”). Observe the relevant national
regulations.
The non-observance of the instructions for use in hazardous areas can
lead to the loss of the explosion protection. Adhere to the following limit
values and instructions (see data sheet).
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
1.3 Responsibility of the operator
The responsibility for classification of zones lies with the plant operator
and not the manufacturer/supplier of the equipment.
1. Safety
