manualshive.com logo in svg

WIKA IPT-2 Series, Operating Instructions Manual

Share
Download
WIKA IPT-2 Series Operating Instructions Manual Download Page 46

46

9 Supplement

WIKA Operating Instructions - Process pressure transmitter IPT-2x

9 Supplement

9.1  Technical data

Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for 

approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for 

example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.

Materials and weights
Materials, wetted (piezoresistive/strain gauge measuring cell)
Process fitting

316L

Diaphragm standard

316L

Diaphragm from measuring range 25 bar, 

with not flush version

Elgiloy (2.4711)

Seal ring, O-ring

FKM (VP2/A), EPDM (A+P 70.10-02), FFKM (Perlast 

G75S), FEPM (Fluoraz SD890)

Seal for process fitting (in the scope of delivery)

 

Ʋ Thread G½ (EN 837)

Klingersil C-4400

Materials, wetted (ceramic/metallic measuring cell)
Process fitting

316L

Diaphragm

Alloy C276 (2.4819), gold-coated 20 µ, gold/rhodium-

coated 5 µ/1 µ

5)

Seal for process fitting (in the scope of delivery)

 

Ʋ Thread G1½ (DIN 3852-A)

Klingersil C-4400

 

Ʋ Thread M44 x 1.25 (DIN 13)

FKM, FFKM, EPDM

Materials for applications in foodstuffs
Surface quality, hygienic process fittings, 

typ.

R

a

 < 0.8 µm

Seal below wall mounting plate with 3A 

approval

EPDM

Materials, non-wetted parts
Type label support on connection cable PE hard
Isolating liquid ceramic/metallic measur-

ing cell

KN 92 medical white oil (FDA conform)

Internal transmission liquid piezoresistive 

measuring cell

Synthetic oil, Halocarbon oil

6)7)

Housing

 

Ʋ Plastic housing

Plastic PBT (Polyester)

5)

  Not on instruments with SIL qualification.

6)

  Synthetic oil for measuring ranges up to 40 bar, FDA listed for the food processing industry. For measuring 

ranges up to 100 bar dry measuring cell.

7)

  Halocarbon oil: Generally in oxygen applications, not with vacuum measuring ranges, not with absolute meas-

uring ranges < 1 bar

abs

.

Summary of Contents for IPT-2 Series













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands