14
WIKA operating instructions, model F3201
EN
79101735.01 08/2021 EN/DE
5. Commissioning, operation
5.4 Electrical connection
To prevent interferences from coupling into the system, observe the following
information:
■
A shielded, low-capacitance measuring cable is attached to the force transducer.
■
A cable amplifier can be fitted optionally.
■
Ground the shield of the measuring cable.
■
Avoid stray fields of transformers, motors and contactors.
■
When using extensions, only shielded and low-capacitance cables should be used.
The permitted maximum and minimum lengths of the cable are defined in ISO 11898-
2. Care should be taken also to ensure a high-quality connection of the shielding.
■
Do not install measuring cables in parallel to 3-phase-current cables and control
cables.
■
Transducers, amplifiers and processing or display units must not be grounded
several times.
The pin assignment of the connector or the cable and the cable amplifier (fitted option-
ally) can be found on the product label.
Standard pin assignment for the cable
Electrical connection
Excitation voltage (Exc+)
Green
Excitation voltage (Exc-)
Black
Signal (Sig+)
Red
Signal (Sig-)
White
Sense (+)
Blue
Sense (-)
Yellow
Shield
Shield
Exc+
Sig+
Exc-
Sense-
SHIELD
Sense+
Sig-
(Red)
(Green)
(Black)
(White)
(Shield)
(Blue)
(Yellow)
