48
WIKA operating instructions digital indicator, model DI35-D
EN
11. Specifications
140553539.03 03/2020 EN/DE
Specifications
Switching output (option)
Number and type
2 or 4 switch contacts (relays), freely programmable
Load capacity
AC 250 V, 5 A (resistive load)
DC 30 V, 5 A (resistive load)
Number of switching
operations
0.5 ∙105 at max. contact load
5 ∙ 106 mechanical
Isolation in accordance with DIN EN 50178
Parameters in accordance with DIN EN 60255
Voltage supply
Power supply
See product label
Power supply galvanically isolated
AC 100 ... 240 V, 50/60 Hz, DC 100 ... 240 V
DC 10...40 V, AC 18 ... 30 V, 50/60 Hz
Overvoltage category II
Power consumption
Max. 15 VA
Electrical connection
Removable plug-in terminal
Wire cross-section up to 2.5 mm²
Serial interface (option)
Interface
See product label
■
RS-232 (not galvanically isolated)
■
RS-232 (galvanically isolated)
■
RS-485 (not galvanically isolated, only for point-to-point
connection)
■
RS-485 (galvanically isolated, only for point-to-point
connection)
Protocol
Manufacturer-specific ASCII
Baud rate
9,600 baud, no parity, 8 data bits, 1 stop bit
Cable length
RS-232: max. 3 m
RS-485: max. 1,000 m
Case, panel mounting
Material
Glass-fibre reinforced polycarbonate, black
Ingress protection
Front: IP65, rear: IP00 (per IEC 60529)
Weight
approx. 350 g
Recommended mounting grid 120 mm horizontal, 96 mm vertical
Mounting
Sliding mounting elements, fixed via screws, for wall thick-
nesses up to 15 mm
