14033590.01 10/2014 GB/D
26
WIKA operating instructions model CS4S
GB
7. Configuration
cAhp
Transmission rate
■
Setting the transmission rate
(the transmission rate must match the transmission rate of the host computer,
otherwise no communication will be possible)
■
Only available when the option [CR5] is present
■
Selection:
2400 bps:
24
4800 bps:
48
9600 bps:
96
19200 bps:
192
9600 bps
cAPr
Parity
■
Selection of the parity.
■
Only available when the option [CR5] is present and when the WIKA protocol is
not selected as the communications protocol.
■
Selection:
no parity:
nonE
even parity:
E8En
odd parity:
odd
even parity
cAhF
Stop bit
■
Setting the stop-bit.
■
Only available when the option [CR5] is present and when the WIKA protocol is
not selected as the communications protocol.
■
Selection: 1, 2
1
7.5 Auxiliary parameter level 2
To activate auxiliary parameter level 2 from the actual value/set point screen, press the
MODE key for approx. 3 seconds while at the same time pressing the ▲ and ▼ keys.
The ▲ and ▼ keys increase or decrease the setting parameters.
By pressing the MODE key, the set value will be stored and the next setting parameter can
be adjusted.
Symbol Name, function, setting range
Factory
setting
hEnh
Sensor selection
■
The multi-function input can be configured for thermocouples (10 types) and
resistance thermometers (2 types) with the units °C/°F and also for current
signals (2 types) and voltage signals (4 types).
■
If the input configuration needs to be changed from a voltage input to
another input signal, first disconnect the sensor from the instrument and
then make the change in the input configuration. If the input configuration is
altered with a sensor connected, the measuring input can be damaged.
K
(-200 ... +1,370 °C)