29
WIKA operating instructions, model CPH6200
EN
11221780.03 07/2022 EN/DE
6. Press the
[SET/MENU]
button.
⇒
Return to main menu.
6.5.2 Automatic recording with adjustable cycle time (
Func
CYCL
)
The logger cycle time is adjustable (see configuration). As an example, with “
CYCL
=
1
:
00
”
one measuring result will be stored every minute.
Additionally, with the measurement type “
rAtE
SLo
”, a current-saving function is
selectable, “
Lo
.
Po
”. If this is “
on
”, it operates so that, while the logger is recording,
a measurement only occurs at the respective logger time. This reduces the current
consumption considerably and is therefore mainly recommended for long-term
measurements (e.g. leak test).
Storable measuring results:
CPH6200-S1: 10,000
CPH6200-S2: 4,000
(at max. 64 recording sequences)
Cycle time:
1 ... 3,600 s (= 1 h)
adjustable in the configuration
A measuring result contains:
■
Slow measurements “
rAtE
SLo
”:
- Sensor 1: Measured value at that data point
- Sensor 1: Min. peak, max. peak since last data point
- Sensor 2
1)
: Measured value at that data point
- Sensor 2
1)
: Min. peak, max. peak since last data point
- Difference (sensor 1 - sensor 2)
1)
: measured value at that data point
- Difference (sensor 1 - sensor 2)
1)
: Min. peak, max. peak since last data point
■
Fast measurements “
rAtE
FASt
” or “
rAtE
P
.
dEt
”:
- Sensor 1: Arithmetic mean value since last data point
- Sensor 1: Min. peak, max. peak since last data point
- Sensor 2
1)
: Arithmetic mean value since last data point
- Sensor 2
1)
: Min. peak, max. peak since last data point
- Difference (sensor 1 - sensor 2)
1)
: Arithmetical mean value since last data point
- Difference (sensor 1 - sensor 2)
1)
: Min. peak, max. peak since last data point
6. Commissioning, operation
1) Only valid for 2-channel version CPH6200-S2
