18
CordlessE-Screwdriver-DHT0001-EN-01
EN
Troubleshooting / Waste disposal
8 Troubleshooting
Issue
Solution
Tool does not start/is not operational
Check battery status and charge the tool by using the
USB charging cord (Fig. 1/
7
) and plugging it into
the TYPE C charging socket
(Fig. 1/
8
).
Tool is too weak to tighten the screw
Check the torque setting (Fig. 1/
6
).
Check the battery status and charge the battery if the
level is low.
Tool is working in the wrong direction
Check forward/reverse buttons and use the right
button (Fig. 4, chapter
6.3).
9 Waste disposal
CAUTION
: Battery-operated units that no longer work should not be disposed of with house-
hold waste. They are to be collected separately, in accordance with the 2012/19/EU directive for
the disposal of electrical and electronic waste, and 2006/66/EC as well as 2013/56/EU direc-
tive for the batteries and accumulators and waste batteries and accumulators and sent for proper
and environmentally friendly recycling.
