Parameter Description
Mode
Station
– Set the USB adapter a wireless client.
Access Point
– Turns the USB adapter to function as a wireless
AP. Please refer to Section 6.5 for the AP settings.
Network Adapter
Display the product information of the USB adapter.
Available Network
Display all the SSID and Signal Strength of wireless stations
nearby. To re-survey the available wireless devices please click
“Refresh”.
There are two ways to automatically make the connection between
the USB adapter and the wireless station on the list.
1. Double-click the wireless station on the list directly.
2. Select the station you intend to connect and then click
“Connect this site“.
Current Network Information
Display the information about the wireless network this adapter is
connecting to. The information includes Channel, Type, SSID, TX
Rate and Encrypt settings. Note: Please refer to Section 6.2 for the
description of each item.
More Setting
For setting more functions including disable/enable WEP and
Power Saving Mode, etc. Please refer to Section 6.2, 6.3 and 6.4
.
Link Status
Display the status of the wireless connection.
BSSID
Display the MAC Address of the network the adapter is connecting
to.
Parameter Description
Signal Strength
This bar shows the signal strength level. The higher percentage
shown in the bar, the more radio signal been received by the
adapter. This indicator helps to find the proper position of the
wireless station for quality network operation.
Link Quality
This bar indicates the quality of the link. The higher the
percentage, the better the quality.
TX Frame
It shows the number of data frames which are transmitted by the
adapter successfully.
RX Frame
It shows the number of data frames which are received by the
adapter successfully.
15
