6 HOW TO CONFIGURE VUNEX WLAN
UTILITY
The Configuration Utility is a powerful application that helps you
configure FA-1200G 802.11g Wireless LAN USB adapter and monitors
the link status during the communication process.
The Configuration Utility appears as an icon on the system tray of
Windows while the adapter is running. Double-click on the icon to start
up the Configuration.
Right click the icon to see the following options:
z
Open Utility Window
Select “Vunex Utility Window” to open the Configuration Utility tool.
z
Exit VUNEX Wlan
Select “Exit VUNEX Wlan” to close the Configuration Utility tool.
Before using the utility, you have to know some restrictions of the utility.
1. If you want to connect to 11g (up to 54Mbps) network, please ensure
to install the adapter to PC or laptop with USB 2.0 interface. This
adapter runs at lower performance while you connect it to the USB
1.1/1.0 port of your computer instead.
2. This adapter will work in 11b mode when the network type is in
Adhoc mode. It is defines by Wi-Fi organization. If you want to
enable the data rate up to 54Mbps (11g), please follow steps listed
below.
A. Go to “Network Connections”.
B. Right Click the “Wireless Network Connection” and select
“Properties”.
C. From the pop-up screen, click “Configure”.
D. Enter into “Advanced” page of the “Properties” screen.
E. Enable the setting of “IBSS_G_Mode”.
13
