Installation
Wieland Electric GmbH | BA000917 | 01/2019 (Rev. B)
45
11
Installation
11.1
Installing a router in a metal housing
ESD component
Observe precautions for handling electro sensitive devices!
Expansion port PORT1 and PORT2 can be connected only when the router is
switched off.
1
Router's motherboard B-RB-v2
2
Expansion port PORT1
3
Expansion port PORT2
4
Left sidewall
5
Right sidewall
6
Rear panel
7
Front panel
8
Bottom cover
9
Top cover
10
Spacers (6×)
11 Screws (8×)
1.
Unscrew the four screws (pos. 11) on the rear panel (pos. 6) and remove it.
2.
Take out the router's motherboard B-RB-v2 (pos. 1).
3.
Connect the expansion port PORT1 (pos. 2) to the connector J8 (see figure above)
on the router's motherboard B-RB-v2 (pos. 1) from the top.
4.
Connect the expansion port PORT2 (pos. 3) to the connector J3 (see figure above)
on the router's motherboard B-RB-v2 (pos. 1) from the top.
CAUTION
CAUTION
Figure 39: Router in
metal housing
