All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
20
2.0. Mounting
2.8. Attaching the blow-out nozzle
Remove protective cover (A); for
this purpose, release
countersunk screws (B).
Withdraw shaft (C) and bearing
bushes (D).
Fit blowout nozzle on sealing
profile.
Press in bearing bushes (D) on
both sides.
Slide shaft (C) into bearing
bushes (D) and secure on both
sides with disk and countersunk
screw (B).
Attach the blow-out nozzle
adjustment [mechanical (E),
electrical or hydraulic] to the
bolts (F) and secure with the
split pin (G).
