3
13
5
110
LED LIGHT
SERIES
MENU
UP DOWN
MIC
AERIAL
2
7
5
29
1
264
Fixing Flange
Menu(UP,DOWN)
Fan
2. Installation dimension of light engine(see
Fig1)
:
(1)
DMX 512 signal control mode:
a. Address Code Setup:
Press button “
UP
” and “
DOWN
” at the same time (maybe several times) until the digital
display shows “ ”, then press the button “
UP
” or “
DOWN
” to select the address
code.
b. DMX Channels:
5 Channels
CH1:Color CH2:Speed CH3:Blank CH4:Dimmer (256 level) CH5:Strobe
Notice:
CH2 controls the switching speed of colors in CH1.
CH3 is the spare channel.
001-508
1. Technical Data
Voltage: 110V 230V
Power: 90W Power: 150W
Color Wheel: 6 colors
LED: White
Light Source: 1-70W LED Light Source: 1-130W LED
Luminous Flux:
Luminous
Flux:
Life of LED : 50000H
Standard Aperture: Ø28mm / Ø24mm / Ø20mm (Optional: Ø30mm Max)
3
Size: 291
X
264
X
135mm
Gross Weight: 7.0Kg
Fig. 1
4
(3)
The connection of DMX Signal Control Mode (See Fig. 2):
Fig. 2
Fig. 3
DMX512 Console
Slave 2
Slave 3
Slave 1
(4)
The connection of Master/Slave Control Mode (See Fig. 3):
Slave 1
Slave 2
Master
(5)
Signal cable and connector (See Fig.4):
2
Signal cable should be 2
X
0.5mm audio cable.
PIN2: SIGNAL-
PIN3:
PIN1: GND
3
1
2
Fig4
1
2
3
(2)
Master/Slave Machines Setup
Master/Slave mode:
Notice:
①
If you need Master/Slaves to change color
synchronously, please set all of slaves as“001”;
②
If you need Master/Slaves to change color in sequence, please set first slave machine as
“006”, the second one as “011” and so on (add “5” one after another) .
MASTER
Slave
DMX Receiver
1.Hold and press the two buttons at
the same time for 3 seconds to
unlock the menu for setting up.
2. Hold and press the button “UP”,
at the same time to press the
button“DOWN” to switch the
menu.Then release both bottons.
3. Press either button of “UP” or
“DOWN” to choose the right
parameter.
4. After 60 seconds, the data will be
saved and the menu locked.
5. When the display is on, the dot
next to the third digit will flash
if there is any DMX signal coming
in.
1
12 preset programs(see attached list. When it
displays “P.XX”, press “UP/DOWN” to get into
this menu)
2
PS.1-PS.2 are audio control programs (when it
display “PS.X”, press “UP/DOWN” to get into
this menu)
3
Color wheel speed setup: total 8 levels:1/2RPM,
1RPM,2RPM,3RPM,4RPM,5RPM,8RPM,12RPM
4
Adjusting of brightness: total 8 levels: d.00,d.10,d.20,
d.35,d.50,d.70,d.85,d.99.(d.99.means100% brightness)
5
r.on: Remote control is on,
r.oF: Remote control is off.
6
DMX address,“001”-“508”are available
No.
STATUS
MENU
DESCRIPTION OF FUNCTIONS
REMARKS
.
.
.
.
.
.
.
.
.
.
FUSE
POWER
SWITCH
Fuse
Power switch
Power cable
DMX
IN
DMX
OUT
Aerial (optional)
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
AERIAL
FUSE
POWER
SWITCH
DMX
IN
DMX
OUT
Model: LEI-8001DMX Model:
MK-L150W DMX
CHAPTER
2
MK-L150W
DMX
6100Lm(6000K)
110
0
0Lm(6000K)
3. Light Engine Setup
There are three control modes for
MK
-Series DMX512 protocol Light Engine:
*
DMX512 Signal Control Mode: DMX512 console is applied to deliver the DMX signal.
*
Master/Slave Mode: One Light Engine is set as Master, while the rest light engines
are set as Slave. Master delivers control signal to slave so that all the machines run the
program synchronously.
*
Audio Control Mode: Light engines are controlled by sound.
ENGINE
MK
