00061810.DOC, Version 2.1
17/47
3
Connection display display
Data signals can be relayed horizontally. For this purpose, connect each of the 15-pin data signal
outputs of a display to the 15-pin data signal inputs of the subsequent display. Fasten the locknuts on
the connectors.
4
Connection network interface computer
Connect the AIO network interface to a computer. Connect the data signal input [
Signal input
] of the
interface to the gigabit ethernet port (RJ45 jack) of the computer via the supplied network cable. The
[
SIGNAL
] LED will be flashing constantly.
If needed, a standard CAT5e network cable up to 100 meters long may be used (different lengths are
available as accessory).
Only use a gigabit network card (1000 Mbps). Network cards with transfer rates of 100 Mbps or
less will not work.
5
Connection AIO network interface AIO network interface
The network interface's output [
Signal Transfer
] serves for relaying the data signal to the [
Signal
Input
] on the next interface.
