z
Function Instruction
1. Reset after it is connected to power supply
After powered on, the system goes to initialization, the LED display shows the previous working mode. For
example, the DMX address is 1 previously. Then after powered on, it shows A001 as below.
DMX Working Mode
1. DMX Mode and Address Setting
Press MENU button until the display shows DMX working mode. Then undo the MENU button to
enter DMX modes. Choose UP or DOWN button to modify the address between 001 to 512. Press Menu
and back to the current working mode.
D M X m o d e
Add 001
D M X m o d e
Add 001
* R e s e t *
2. DMX
Pin
Assignment
：
Male and Female DMX connector Pin Assignment:Pin1 = Gnd Pin2 = Dmx- Pin3 = Dmx+
3. DMX CONNETION CHART
First
Second
……
n
4. DMX Function Chart
CH1 CH2
CH3
CH4
CH5
0~50 Black Out
NA
NA
NA
NA
51~100 Dimmer1
Flash
All Red
All Green
All Blue
Page 3 of 4
