10
The electrical connection between modules.
Signal connection: connecting the male and female plugs between
two screens.
Power connection: the screen's input power plug connects the
DC output plug seat of power box, every piece of screen's power
is supplied by power box independently.
Diagram8
Diagram9
Warning!
The connectors can be connect successfully only
when they are a pair, if the connector can't be insert, it
should change other connectors.
These two kinds of connectors are both low voltage, please do not connect
with high voltage.
The screen and video processor are connected with net cable. There are
two groups of net cables, one is for output signal, another is for input
signal, the input net cable and video processor's cable are connected by
contactor, output net cable is connected with the output net cable of next
screen, the rest can be done by the same manner.
The connection of power, using a DC out put cable to connect the power
output cable, the DC output cable has the options of 1.5 meters, 3 meters,
5 meters and 10 meters, the power box can be put under the screen when
the chosen cable is more than 3 meters; the power box should be fix on
the girder (or similar supporter)above the screen.
One side of the DC output cable is connected on the DC output port,
another side is connected the power input cable of screen by connector.
