WiebeTech LLC
R T X - I R U s e r ’ s M a n u a l
- 9 -
NOTE: If any of the drives are inaccessible after
powering on the unit, try the following steps:
1. Turn off the power.
2. Remove the drive(s) in question.
3. Reinsert the drive(s).
4. Turn on the power.
Chapter 4: Hard Drive Installation
If you purchased your RTX with pre-configured drives, you may skip to the next section.
Install a SATA (Serial-ATA) hard drive into each bay.
With TrayFree™ technology, this
process couldn’t be easier! Simply pull the ejection handle to open the bay door, slide in your SATA
drive, and shut the door behind it. The drive is inserted with the label up and the SATA connection on the
drive inserted first. With the RTX400 & RTX600H, you can lock the bay for additional security, but make
sure to unlock it before pulling on the ejection handle again.
RTX400
RTX600
WARNING: Do not block the ventilation
fan during operation. Overheating may
damage the device or hard drives.
All RTX TrayFree Bays accept 1TB SATA
drives, have power and access LEDs, and
connect to the host via a SATA
