WiebeTech LLC
R T X - I R U s e r ’ s M a n u a l
- 11 -
5.2.2 LCD functions:
Alarm Mute
To turn off the alarm sound when an error occurs
Reset/Shutdown
To reset or shutdown the controller
Quick Install
To use “Quick Install” to set up a volume by three steps. Please refer to section 4.3
for configure via the web-based GUI
View IP Setting
To view current IP address, subnet mask and gateway
Change IP Config
To set up the IP address, subnet mask and gateway. You can choose to use DHCP
server (for IP address allocation) or manually specify the IP address
Reset to Default
To restore factory defaults:
Default Password:
1234
Default IP address:
192.168.0.1
Default subnet mask:
255.255.255.0
Default gateway:
192.168.0.254
5.2.3 RTX-IR LCD Menu Diagram
Use the following chart for reference when following the instructions in 5.2.4 through 5.2.7 for setting up
the RTX according to your network type.
Main Menu
2
nd
Menu Screen
3
rd
Menu Screen
4
th
Menu Screen
5
th
Menu Screen
WiebeTech
RTX
[Alarm Mute]
[ENT:OK
ESC: Back]
[Reset/Shutdown]
[Reset]
[ENT:OK
ESC: Back]
[Shutdown]
[ENT:OK
ESC: Back]
[Quick Install]
RAID 0
(RAID 1/RAID 3/
RAID 5/RAID 6)
xxxxxx MB
Volume Size
(xxxxxx M)
Adjust Volume
Size
Apply The
Config
[ENT:OK
ESC: Back]
[View iSCSI IP]
[CH1 Static]
[192.168.1.1]
[CH2 Static]
[192.168.2.1]
[IP Subnet Mask]
[255.255.255.0]
[IP Gateway]
[192.168.000.254]
[Change IP Config]
[DHCP]
[ENT:OK
ESC: Back]
[Static IP]
[IP Address]
Adjust IP address
[IP Subnet
Mask]
Adjust Submask IP
[IP Gateway]
Adjust Gateway
IP
[Apply IP
Setting]
[ENT:OK
ESC: Back]
[Reset to Default]
[ENT:OK
ESC: Back]
