WiebeTech LLC
D e s k t o p G B U s e r M a n u a l
- 8 -
One Year Warranty Statement
Manufacturer warrants its products to be free from defects in material and workmanship under the
following terms:
•
The effective period of this warranty is ONE year for parts and labor from the date of customer
purchase.
•
The manufacturer is responsible only to repair or replace any defective hardware component part
of such products.
•
The buyer is obliged to pay shipping cost of sending defective products to the manufacturer.
The warranty will not apply when
•
Any product, on which the serial number has been defaced, modified or removed.
•
Malfunction damage, deterioration resulting from accident, misuse, neglect, fire, water, or other
act of nature, unauthorized product modification or failure to follow instructions supplied with the
products.
•
Damage or other loss in any shipment.
Attention
1. It must use external power
2. It just uses one interface type at a time
Strongly Recommended
When using Windows 98/98 SE, Windows ME, Windows 2000, MAC OS 8.6, or MAC OS 9.XX, you must
install the driver before connecting this product to the computer.
FCC Compliance Statement
This equipment has been tested and found to comply with limits for a Class B digital device, Pursuant to
Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions may caused harmful interference to radio communications.
However, there is no guarantee that interference will no occur in a particular installation. If this equipment
does cause interference to radio or television equipment reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
•
Reorient or relocated the receiving antenna.
•
Move the equipment away from the receiver.
•
Plug the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for additional suggestions.
Only equipment certified to comply with Class B should be attached to this equipment to continuing
compliant with FCC emission limit, and must have shielded interface cables. You are cautioned that may
change or modifications to the equipment not expressly approved by the party responsible for compliance
could void your authority to operate such equipment.
