Kunststoffschweißtechnik
Description of product
Chapter 1
18.04.11
Working Instructions WIDOS HRG 16, Segment
Page 7 of 50
1.3. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
1.4. Designation of the product
The product is designated by a nameplate.
It contains the type, the serial number and the year of construction of the machine.
1.4.1. Technical data
1.4.1.1.
WIDOS
HRG 16, Segment
General data
Weldable materials:
- PE-HD, (PP)
Emissions
- Noises exceeding 80 dB (A) may occur; during planing it is
obligatory to wear ear protection!
- When using the named pipe materials and when welding
below 260° C, no toxicant damp arises.
Ambient conditions in the
welding area
- Take care for cleanness (no dust at the welding area).
- If secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to work in
any outside temperature condition as far as the welder is
not constrained in its manual skill.
- Avoid humidity, if necessary use a welding tent.
- Avoid strong sun rays influence.
- Protect from wind, shut the pipe ends.
1.4.1.2.
Hydraulic aggregate
Feeding:
CEE 32A-Phase converter
Voltage:
400 V
Frequency:
50 Hz (± 10 %)
Power hydraulic-pump:
2 / 1.5 kW
Motor speed:
2820 / 1380 rpm
Working pressure:
0 - 160 bar
Max. working pressure:
160 bar
Current hydraulic pump:
5.2 / 4.0 A
Weight:
47 kg
