Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
18.07.2013 Working
Instructions
WIDOS ESI 4000
Page 32 of 37
Display:
2nd line:
Delete CNC memory?
Attention!
The CNC memory is deleted with <+>.
Display:
2nd line:
WIDOS ESI 4000
10.10.2011 10:10
Basic menu
Current date and time
5.15. Welding data management
The battery buffered CNC memory (RAM) can store appr. 350 weldings.
Make sure that this figure is not exceeded (error message „memory full“
appears on the display) otherwise the first stored welding is overwritten.
If necessary read out welding data in time.
5.16. Possible defects and their elimination
Defect
Possible Cause
Identification and Elimination
Welding breaks off
- Soiled or damaged contact
- Change the contact
Barcode does not work
- Barcode soiled
- Reading pen defective
- Clean barcode, repeat read in
- Manually enter digits of the
barcode: simultaneously
press all three buttons
<+ / - / Enter>, afterwards
manually enter the digits.
5.17. Short instruction
