Wido WD040110036, Manual, Page: 8 / 16

ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR POWER TOOL
1) Hold power tools by insulated gripping surfaces when performing an operation where the cutting
tools may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool
“live” and shock the operator.
2) Do not drive screws into existing walls or other blind areas where electrical wiring may exist. If this
situation is unavoidable, remove all fuses or disconnect all breakers feeding the work area.
3) Never hold the body of the cordless screwdriver near the switch while changing screwdriver bits.
Accidentally touching the switch may start the power tool and possibly cause an injury.
4) Always use the correct shape and size of screwdriver bit that matches the head of the screw.
5) Do not use worn or damaged screwdriver bits. Worn or damaged screwdriver bits will not drive the
screw properly and may jump out of the screw head, causing possible injury.
6) Use clamps or another practical way to secure and support the work piece to a stable platform.
Never hold in hand or across legs. The rotating action of the screwdriver may cause the bit to come
loose from the screw and cause injury.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR CHARGER AND BATTERY
1) Charger is for indoor use only. Do not expose charger to rain or snow. Do not recharge battery in
damp or wet environment.
2) Use only the supplied charger when charging your power tool. The use of any other charger could
damage the power tool or create a hazardous condition.
3) Always charge the battery pack between temperatures 0°C to 40°C (32°–104° F).
4) Before using charger, be sure the supply is the same as the voltage given on the nameplate of the
charger.
5) To unplug charger from outlet when you do not use the charger.
6) To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting
charger.
7) If the charger supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
8) Do not incinerate the battery even if they are severely damaged or completely worn out. The battery
can explode in a fire.
8
3.6V CORDLESS SCREWDRIVER ENG