Wido WD012411400, Manual

Page: 8 / 16

1400W MIXER ENG
the use of both hands. This power tool cannot be used one handed.
11) Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control the
power tool.
12)
The power tool should only be started with the mixing paddle in the mixing container. Start the
power tool with the speed set at the lowest speed setting and gradually increase the speed until the
optimum mixing performance is achieved.
13) Never reach with your hand or any other object into the mixing container during mixing.
14)
Once the mixing process is completed, the operator should use the speed adjustment wheel to set
the motor to its lowest speed setting, and then switch off the motor with the mixing paddle still in the
mixing container. The mixing paddle should be allowed to come to a complete standstill before the
power tool is removed from the mixing container.
15) When an extension cord is required you must ensure it has the correct ampere rating for your
power tool and that it is in a safe electrical condition.
16) Fully unwind extension cords to avoid potential overheating.
DOUBLE INSULATION
The power tool is double insulated. This means that all the external metal parts are electrically insulated
from the main power supply. This is done by placing insulation barriers between the electrical and
mechanical components making it unnecessary for the power tool to be earthed.
IMPORTANT NOTE
Be sure the supply is the same as the voltage given on the rating plate. The power tool is fitted with a
two-core cable and plug.
Remove the main plug from socket before carrying out any adjustment or servicing.
Do not use this power tool for mixing corrosive, explosive or combustible materials.
8