Wido V1 PRO, User Manual

Page: 13 / 24

WIDO V1 PRO - USER GUIDE
13
REMOVING THE BATTERY FROM THE BIKE:
Simply remove the battery from the frame as explained earlier in this section and plug the
charger into the battery.
CHARGING TIMES:
With standard charger (2.0 A) : between 4 to 6 hours*
* Depends on current battery usage level, climate conditions, earlier charging cycles.
IMPORTANT: If your bike will be kept for a long period in extreme temperatures (below
0ºC/ 32ºF or above 35ºC / 95ºF), remove the battery and keep it in a place where the
temperature is between 4ºC / 40ºF and 32ºC / 90ºF.
Do not charge the battery when the air temperature is below 0ºC / 32ºF or above
40ºC / 104ºF. This is could result in serious damage to the battery.
BATTERY USAGE
Before assembling your bike, it is recommended that you should charge the battery. This
could take up to 6 hours.
To reach the furthest distance on one charge, it is recommended to pedal the bicycle as
often as possible, or use the lowest power assist setting - this will help save the battery.
When battery power is low while riding your e-bike, it is recommended to pedal as much
as possible to minimise battery usage so you can get home on the charge that is left on
the battery. Once home, charge it as soon as possible.
To further get the best distance out of your e-bike, refrain from unnecessary braking; coast
as much as possible. Turn off the power when parked up. If you decide to walk & push
your bike for any reason, keep the power turned off.
IMPORTANT: Type - Lithium battery. Voltage: 36V. Please check all notes/instructions
directly on the battery’s label.
WARNING: Do not take the battery apart. Do not burn, puncture, submerge in water
or damage the battery in any way. Do not use the battery if it appears to be damaged.
In case of any noise, irregular heat or leakage from the battery, stop use immediately.
Keep the battery stored in a ventilated place and out of direct sunlight. Keep the battery
stored above 0° C to avoid excess loss of battery power.