widinovations Confidential
©
7
The power plug must be located near the equipment to allow the operator to easily connect or disconnect
it. The use of extensions and of damaged cables is forbidden.
In the event that any anomaly occurs during machine functions it must be immediately turned off.
When the lamination is placed between the two silicone rolls use the pedal do control the machine and
keep it at low speeds.
While the machine is working, rigid materials should not be placed in contact with the silicone rolls, as this
could damage their surface or cause malfunctions. Damage to the rubber rolls could be permanent and
require their replacement.
Do not operate the equipment with wet hands, as this may cause electrical discharges.
The machine is equipped with a heating system. The operator must not touch the silicone rolls while these
are heated to avoid the risk of skin damage.
Children are forbidden to operate the equipment.
It is forbidden to pulverize or pour water or any liquid on the machine, as this might cause electrical
discharges and damage the machine.
, contact technical support. It is forbidden to place objects on
top of the power cable as this could cause electrical shocks or start fires.
When operating the machine be mindful of clothes, ties, hair, necklaces or scarves that might come in
contact with the silicone rolls and become stuck, risking damage to the machine and personal injury.
When the machine is working keep all objects away from the rolls, control panel and all moving parts to
avoid damage to the machine and personal injury.
This equipment was not designed to handle metals or any other hard objects. The use of knives and blades
or any other hard or sharp objects in contact with the rubber rolls is forbidden.
It is forbidden to cut the supports directly on the surface of the rolls.
When the laminate, vinyl, film or paper is being fed into the rolls, please use the pedal to maintain low
speeds and prevent damage to the rolls.
When not in use, the equipment must be turned off to prevent usage by untrained individuals.
Before moving the equipment, it must always be disconnected from the power. When moving the machine
be mindful of moving parts to avoid personal injury.
In case of malfunction, it is forbidden for unqualified individual to open or replace parts of the equipment.
Please contact your supplier and request technical assistance.
Disconnect the machine from the power before performing maintenance.
Disconnect the equipment from the power if it will be idle for a long duration of time. Raise the upper roll
and use the support hooks to keep it in place and avoid creating impressions or marks on the silicone roll.
Using the machine for
d electrical or
mechanical faults.
Avoid placing your hands on the side supports of the frontal working area when raising or lowering it.
It is absolutely forbidden for anyone who is under the influence of drugs, alcohol or reaction-impairing
medication to work with the machine.
