SABRE
TM
Shield Installation Guide
18
5. The SABRE
TM
I Web Console will appear on your screen.
6. Allow the terminal a few minutes to acquire the GPS co-ordinates.
Once the GPS co-ordinates is acquired, the
New GPS acquired
message is
displayed.
Note:
The GPS co-ordinates will not be displayed until you click
Register Network
to register to Inmarsat’s BGAN network. The
GPS display prohibited
message
will be displayed if the GPS coordinates are prohibited by the BGAN network.
It is recommended to register to the BGAN network after acquiring new GPS
co-ordinates before powering down the terminal. This will ensure the GPS
co-ordinates are stored in the terminal’s memory.
