BDU LED States
Getting Started
•
Connect the cables and accessories as shown
in Terminal Simplified Block Diagram.
•
Insert a Fleet One SIM card, with the gold
printed circuit facing down.
•
Switch on the terminal.
•
User can access the web console when the
Terminal
LED turns green.
•
System is ready for normal operation when
the
Terminal
,
Antenna
and
Registered
LEDs
turn green.
Using the Optional Primary Handset
•
On the optional primary handset, dial phone
number in the format:
<00><CountryCode><Telephone Number>
•
Disconnect the call by pressing the key.
Using a Corded Analog Telephone
• Lift the handset or press the off-hook button,
listen for the dial-tone and dial phone number in
the following format:
<00><Country Code><Telephone Number><#>
.
•
Hang-up to disconnect.
Sending an SMS using the Optional
Primary Handset
•
Select
Menu>Messaging>OK>New
message>OK.
Enter your test message using
the keypad.
•
Select
OK > Send
.
•
Enter the destination mobile number format:
<00><Country Code><Telephone Number>
OR
Select
OK
to choose an existing contact and
then select
OK
to send text message.
Status
Meaning
TERMINAL
Steady
Amber
Terminal (BDU) is powering up.
Steady
Green
Terminal (BDU) has powered up
successfully.
Steady
Red
Terminal (BDU) has detected a
failure state.
Blinking
Red
VMS Alarm Notification.
ANTENNA
Steady
Amber
ADU is powering up.
Steady
Red
ADU has detected a failure
state.
Blinking
Amber
ADU is calibrating.
Blinking
Green
System is performing satellite
search.
Steady
Green
System has locked onto satellite.
No light (Off)
ADU is in OFF state.
REGISTERED
Steady
Amber
Attempting network registration
Steady
Green
Ready for all (Voice and Data).
Steady
Red
Network failure / Registration
error.
Blinking
Amber
Ready for Voice only.
Blinking
Green
Ready for Data only.
No light (Off)
No network service.
DATA ACTIVE
Steady
Amber
Activating data connection.
Steady
Green
Data connection is ready.
Steady
Red
Data activation failure
No light (Off)
No data connection.
Useful Password Reference:
•
Web Console Username:
admin
(Default)
•
Web Console Password:
1234
(Default)
•
Terminal Pin:
0000
(Default)
Also applies to Factory Reset password.
