52
53
Hearing aid with an open ear-tip
The anchor
To secure the position of the
ear-tip in your ear canal you
should use an anchor adjusted
to fit your ear.
Illustrations 1-5 show how to adjust the anchor for the
right ear. Your solution may look different.
Adjusting the anchor
The anchor is supplied sepa-
rately from the rest of the ear-
set and must be adjusted to fit
your ear.
1: Pull the pointed end of the
anchor through the upper hole
on the receiver located at the
end of the earwire.
2: Continue pulling until the an-
chor is stopped by the grip at
the end.
3: Now guide the pointed end
of the anchor through the lower
hole to form a small loop.
4: When the loop is the correct
size, any excess should be cut
off, leaving only the loop.
The anchor loop has the correct size when it supports
the position of the ear-tip in the ear canal, and the ear-
set sits securely in and on the ear.
