22
23
Switching between the
listening programs
You can switch between the
programs by using the program
button on the back of the hear-
ing aid. Each time you switch to
another program, a click is pro-
duced unless this function has
been disabled.
In the standard setting, a spoken message will indicate
your choice of program (see page 6).
Zen+
If your hearing aid is provided with the Zen+ program,
you access this program by pressing the program but-
ton for more than one second. This function is called
SmartToggle.
A short press of the program button in the Smart-
Toggle mode will allow you to cycle through the avail-
able Zen styles. You can exit SmartToggle by pressing
and holding the program button for more than a sec-
ond.
If you have chosen the tone indication setting, the vari-
ous sounds tell you which program you have chosen:
Program 1: One brief beep
•
Program 2: Two brief beeps
•
Program 3: Three brief beeps
•
Program 4: One long and one brief beep
•
Program 5: One long and two brief beeps
•
Zen+: Tone
•
If you wish to have the program button disabled, please
consult your hearing care professional.
Remote control
- an alternative way of operating the hearing aid
A remote control is an accessory for the
hearing aid. You can easily operate your
hearing aid without a remote control,
but it gives you a number of additional
options. For help to determine whether
you could benefit from a remote con-
trol, please consult your hearing care
professional.