ezWAVE Access Point Users’ Guide
Version 1.6
Copyright© Widelink 2000
DOC – 2001.02.01
Page 20 of 50
Set Bits per second (baud rate) to
1
9200
1
9200
1
9200
1
9200, Data bits to 8
8
8
8, Parity to None
None
None
None, Stop bits to
1
1
1
1
,
and Flow control to None
None
None
None. Click OK
OK
OK
OK.
The Setup screen appears in the HyperTerminal window. If the text does not appear
immediately, press
Enter
.
If it is successfully connected to Access Point, it will display “prompt” on the terminal
program’s display box:
Type
disconfig
and press
Enter
to see the current default settings of Access Point.
Make a note of the SSID, Channel number and IP address. Widelink’s Access Point has
a default IP;
100.100.100.100
The other options that are displayed can be ignored in this chapter and there will be
detailed explanation on next Access Point Management section
