Line Power VDSL2 Extender Installation Manual Page 8
WIDEAREA Telecommunication Technology Co.,Ltd
the original packing material.
Be sure to inspect the equipment for shipping damage, including bent or loose
hardware, and broken connectors. If the equipment appears to have been damaged in
transit, please contact your supplier.
5.2 Line Power ADSL Loop Extender Installation
(1) The AER800-1/4/8PVL Box can be installed in a junction cabinet, pedestal, or pole
mounted via the supplied mounting brackets. Once mounted, ground the unit via the
supplied grounding screw on the bottom outside of the box.
Attention: Copper-core wire with no less than 2.5mm
2
(13 AWG) diameter is
required as ground wire. One end of the wire should connect to Loop Extender’s
ground terminal. The other end of the wire should connect to a good grounding
point. Grounding reliability is the best way to protect the unit against lightning
damage.
(2) Insert the AER800-C1PVL card into the AER800-4/8PVL box.
(3) Connect the line from the DSLAM to the “CO” terminal, and connect the line linked
to the customer’s modem to the “CPE” terminal. Once the “CO” pair is connected, the
power LED will come on to indicated the AER800-C1PVL card is operational.
(4) After confirming that all the twist-pair cables are connected correctly, and the
AER800-4/8PVL is securely installed, the extender will work 10 seconds after power is
steadily applied.
Attention:
“A” and “B” represent tip and ring of the twisted-pair. No polarity.
